Identify intermittent problem symptoms and corrective actions.
- Follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved.
- See Parts listing, type 7891 to
determine which components are CRUs and which components are FRUs.
- If an action step is preceded by "(Trained service technician
only)," that step must be performed only by a trained service technician.
|
|---|
| Symptom |
Action |
|---|
| A problem occurs only occasionally
and is difficult to diagnose. |
- Check the Advanced Management Module event log for errors
- Make sure that:
- When the blade server is turned on, air is flowing from the rear
of the blade server at the blower grill. If there is no airflow, the
blower is not working. This causes the blade server to overheat and
shut down.
- Ensure that the self configuring SCSI device (SCSD) bus and devices
are configured correctly.
|