Identify microprocessor problem symptoms and the corrective
actions to take.
- Follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved.
- See Parts listing, type 7891 to
determine which components are CRUs and which components are FRUs.
- If an action step is preceded by "(Trained service technician
only)," that step must be performed only by a trained service technician.
|
|---|
| Symptom |
Action |
|---|
| The blade server will not boot or a checkpoint
or firmware error code is logged in the management-module event log
(the startup microprocessor is not working correctly) |
- If a checkpoint or firmware error was logged in the Advanced Management
Module event log, correct that error.
- If no error was logged, restart the blade server and check the
management module event log again for error codes.
- Replace the system-board
|