D1xx3y01 to D1xx3yF2 Service processor dump codes

These D1xx3yxx service processor dump codes use the format: D1xx3yzz, where xx indicates the cage or node ID that the dump component is processing, y increments from 0 to F to indicate that the system is not hung, and zz indicates the command being processed.

Table 1 lists the progress codes that might be displayed during the power-on self-test (POST), along with suggested actions to take if the system hangs on the progress code. Only when you experience a hang condition should you take any of the actions described for a progress code.

Table 1. D1xx3y01 to D1xx3yF2 checkpoints
  • If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. If an action solves the problem, you can stop performing the remaining actions.
  • See Parts listing, type 7891 to determine which components are CRUs and which components are FRUs.
Progress code Description

(Command Being Processed)

 Action
D1xx3y01 Get SCOM
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y02 Get scan ring
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y03 Get array values
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y04 Stop the clocks
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y05 Flush the cache
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y06 Get CFAM
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y07 Put SCOM
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y08 Send command
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y09 Get optimized cache
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y0A Get general purpose (GP) register
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y0B Processor clean-up
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y0C Get JTAG register
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3y0D Stop clocks without quiescing
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3yF0 Memory collection set-up
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3yF1 Memory collection DMA step
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xx3yF2 Memory collection cleanup
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
Parent topic: POST progress codes (checkpoints)

Notices | Terms of use | Privacy | Support