D1xx900C to D1xxC003 Service processor power-off checkpoints

These D1xx service processor power-off status codes offer information about the status of the service processor during a power-off operation.

Table 1 lists the progress codes that might be displayed during the power-on self-test (POST), along with suggested actions to take if the system hangs on the progress code. Only when you experience a hang condition should you take any of the actions described for a progress code.

Table 1. D1xx900C to D1xxC003 checkpoints
  • If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. If an action solves the problem, you can stop performing the remaining actions.
  • See Parts listing, type 7891 to determine which components are CRUs and which components are FRUs.
Progress code Description

(Command Being Processed)

 Action
D1xx900C Breakpoint set in CPU controls has been hit
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xxB0FF Request to initiate power-off program has been sent
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xxC000 Indicates a message is ready to send to the hypervisor to power off
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xxC001 Waiting for the hypervisor to acknowledge the delayed power off notification
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xxC002 Waiting for the hypervisor to send the power off message
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
D1xxC003 Hypervisor handshaking is complete
  1. Go to Checkout procedure.
  2. Replace the system-board, as described in Replacing the FRU system-board and chassis assembly.
Parent topic: POST progress codes (checkpoints)

Notices | Terms of use | Privacy | Support