Management module service processor problems

Determine if a problem is a management module service processor problem and, if so, the corrective action to take.

  • Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
  • See Parts listing, type 7891 to determine which components are CRUs and which components are FRUs.
  • If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician.
Symptom Action
Service processor in the management module reports a general monitor failure. Disconnect the BladeCenter® unit from all electrical sources, wait for 30 seconds, reconnect the BladeCenter unit to the electrical sources, and restart the blade server.

If the problem remains, see Solving undetermined problems, or the Advanced Management Module Guide
Parent topic: Troubleshooting tables

Notices | Terms of use | Privacy | Support