Starting the TEMP image

Start the TEMP image before you update the firmware.

Perform the following procedure to start the TEMP image.

  1. Access the advanced management module.

    See the BladeCenter® Management Module Command-Line Interface Reference Guide or the BladeCenter Serial-Over-LAN Setup Guide for more information.

  2. Click Blade Tasks > Configuration > Boot Mode.
  3. Click the applicable PS703 or PS704 blade server in the list of blade servers in the BladeCenter unit.
  4. Select Temporary to force the system to start from the TEMP image.
  5. Restart the blade server.
  6. Verify that the system starts from the TEMP image, as described in Verifying the system firmware levels.
Parent topic: Recovering the system firmware

Notices | Terms of use | Privacy | Support