BladeCenter S Types 7779 and 8886 installation worksheet

Use this worksheet to plan for the BladeCenter S system location in the rack and to determine the rack weight.

When completed, the worksheet provides a total weight for up to six blade servers in the BladeCenter S chassis. Each worksheet applies to one 8886 BladeCenter S unit. Fill out a worksheet for each BladeCenter S chassis in the rack.

Before you can complete this worksheet, fill out an installation worksheet for each blade server (1 to 6) that you plan to install in this chassis. See Blade server and workstation blade installation worksheet.
Circle the 8886 BladeCenter S number and the BladeCenter S position in the rack.
Circle how many power modules are required for this BladeCenter S unit.
Note: Four power modules on four 220-volt ac circuits provide the most power. See Power consumption guidelines for more information about component power consumption and how to provide redundant power.
Compute and record Subtotal 1 for the weight of these components.
For each blade server (1 through 6), record the weight numbers from the blade server worksheets.
Compute and record Subtotal 2 for blade servers 1 through 6.
Record the subtotals for weight on the bottom of the worksheet. Add the subtotals to derive the total weight for this BladeCenter S unit.

Note: The fully configured weight of a BladeCenter S system with blade servers is approximately 108.86 kg (240 lbs).

Table 1. BladeCenter S Types 7779 and 8886 worksheet
Rack position (BladeCenter S system is 7 U): U___ to U___ Rack number and location: ____________________________________________
Component	Quantity	Weight	Base or optional feature
Chassis	1	35.38 kg (78 lb)	Base (including bezel) without modules or fillers
Power modules	2 or 4	Quantity × 1.86 kg (4.1 lb) = ___	Modules 1 and 2 are base. Modules 3 and 4 are required for more power.
Power module fillers	2 or 0	Quantity x .19 kg (.42 lb)	Base
Advanced management module	1	.82 kg (1.79 lb)	Base
I/O modules	4 maximum	Quantity × 1.5 kg (3.3 lb) = ______	Optional
I/O bay fillers	3 maximum	Quantity x .33 kg (.72 lb) = ______	Optional
Fan modules	4	4.09 kg (9.02 lb)	Base (includes all four fan modules)
Media tray	1	4.12 kg (9.07 lb)	Base
Serial Pass-Thru Module	1	.59 kg (1.31 lb)	Optional
Disk storage module	2	Quantity x 3.24 kg (7.15 lb) = ______	Optional
Hard disk drive	12	Quantity x .91 kg (2.0 lb) = ______	Optional
Hard disk drive filler	12	Quantity x .043 kg (.095 lb) = ______	Optional
Subtotal 1 for chassis worksheet		______
Blade servers	6	Quantity x 5.5 kg (12 lb) = _______	Optional
Blade fillers	5	Quantity x .15 kg (.330 lb) = ______	Base
Subtotal 2 for blade servers 1 through 6		______
Subtotal 1 (Chassis) Subtotal 2 (Blades) Total		Subtotal 1______ Subtotal 2______ ============== Total__________