Blade server and workstation blade installation worksheet

Use this worksheet to describe each blade server and workstation blade that you plan to install in the BladeCenter S system. Fill out one worksheet for each blade server that you will install.

The following factors drive the choices you make when filling out a blade server worksheet:

What applications will this server provide?
Which operating system will the server use?
What are the redundancy requirements for this server? Redundancy is handled at multiple levels:
- Blade server level - a mirror image blade server that resides in the same BladeCenter S chassis or in a different BladeCenter S chassis.
- BladeCenter S system level - a mirror image BladeCenter S system that resides in the same rack or in a different rack.
- Rack level - a set of BladeCenter S systems in a rack that mirrors a set of BladeCenter S systems in a different rack.
What are the network connectivity requirements for this server, including physical connectivity for a redundant path?

How to fill out this worksheet:

Record the name and purpose of this server.
Record the operating system on the worksheet.
Select an installation option for the operating system.
Record the applications for this server.
Chose the I/O module bay that this server uses to communicate with an Ethernet switch module; circle 1, 2, 3 , or 4.
Note:
- I/O module bays 3 and 4 require a SAS expansion card option in the blade server.
- I/O module bay 2 requires an expansion card option, such as the 2/4 Port Ethernet Expansion Card
Select Automatic through DHCP server or Static and record the IP address information. (The host name can be up to 63 characters.)

Table 1. BladeCenter HC10 workstation blade worksheet
Workstation blade model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Workstation blade purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Workstation blade IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Workstation blade	1	Workstation blade with Intel™ Xeon processor	Base
Video graphics adapter	1	☐ NVIDIA Quadro FX 1600M ☐ NVIDIA Quadro NVS 120M ☐ Video pass-through	Base
Memory slots 1 and 2	2	☐ 512 MB ☐ 1 GB ☐ 2 GB	Base
Memory slots 3 and 4	2	☐ 512 MB ☐ 1 GB ☐ 2 GB	Optional
SATA internal hard disk drive	1	☐ 60 GB	Optional

Table 2. BladeCenter HS12 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with Intel™ Xeon processor	Base
Memory slot 1	1	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Base
Memory slots 2–6	5	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional
cKVM feature		☐ cKVM card	Optional
Internal hard disk drives	2	☐ 15.8 GB Solid State ☐ 31.4 GB Solid State ☐ 80GB SATA	Optional
I/O Expansion cards	1	☐ Ethernet ☐ Fibre Channel ☐ SAS Note: Make sure that the type of switch modules used in I/O bays 3 and 4 match the type of I/O expansion cards that you choose.	Optional
PCI I/O Expansion Unit	1	PCI I/O Expansion Unit 3e	Optional

Table 3. BladeCenter HS20 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with Intel™ Xeon processor	Base with either two 256 or 512 MB memories
Second processor	1	Xeon DP	Optional
Memory slots 1 and 2	2	☐ 256 MB ☐ 512 MB ☐ 1 GB ☐2 GB	Base
Optional memory choices for slots 3 and 4	2	☐ 512 MB ☐ 1 GB ☐ 2 GB	Two 256 or 512 MB base memory
EIDE hard disk drives	1 or 2	40 GB ATA 100; 5400 RPM	Optional (not supported for NEBS environment)
IDE Flash disk drive	1 or 2	☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional
I/O Expansion option	1	☐ Ethernet ☐ Fibre Channel ☐ SAS	Optional
SCSI Storage Expansion option	1	Supports two additional hot-swapped SCSI hard disk drives	Optional
SCSI hard disk drive	1 or 2		Optional
PCI I/O Expansion option	1	Supports two PCI-X adapters	Optional
PCI-X adapter 1			Optional
PCI-X adapter 2			Optional

Table 4. BladeCenter HS21 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with Intel™ Xeon processor	Base
Second processor	1	Xeon processor	Optional
Memory slots 1 and 2	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Base
Optional memory choices slots 3 and 4	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional
cKVM feature		☐ cKVM card	Optional
Internal hard disk drive	2	☐ 36 GB SAS ☐ 73 GB SAS ☐ 146 GB SAS ☐ 15.8 GB Solid State ☐ 31.4 GB Solid State	Optional
Storage and I/O Expansion blade	1	☐ PCI I/O Expansion Unit 3e ☐ Storage and I/O Expansion Blade	Optional
I/O Expansion option	1	☐ Ethernet ☐ Fibre Channel ☐ SAS	Optional

Table 5. BladeCenter HS21 XM blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with Intel™ Xeon processor	Base
Second processor	1	Xeon processor	Optional
Memory slots 1 and 2	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Base
Optional memory choices slots 3 and 4	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
Optional Memory slots 5 and 6	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
Optional memory choices slots 7 and 8	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
cKVM feature		☐ cKVM card	Optional
Modular flash drive (USB compact flash)	1	☐ 4 GB ☐ 8 GB	Optional
Internal hard disk drive	1	☐ 36 GB SAS ☐ 73 GB SAS ☐ 146 GB SAS ☐ 15.8 GB Solid State ☐ 31.4 GB Solid State	Optional
Storage and I/O Expansion blade	1	☐ PCI I/O Expansion Unit 3e ☐ Storage and I/O Expansion Blade	Optional
I/O Expansion option	1	☐ Ethernet ☐ Fibre Channel ☐ SAS	Optional

Table 6. BladeCenter JS12 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
8844 blade server	1	Two single-core, 64-bit, IBM PowerPC® 970MP microprocessors (2.7 GHz in BladeCenter H unit, 2.6 GHz in other BladeCenter units) or two dual-core, 64-bit, IBM PowerPC 970MP microprocessors (2.5 GHz in BladeCenter H unit, 2.3 GHz in other BladeCenter units)	Base with two 1 GB dual inline memory modules (DIMMs) standard with 2-core (two single-core processors); two 2 GB DIMMs with 4-core (two dual-core processors).
Memory slots 1 and 3. Select a memory size. (Optional)	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional; Second pair of DIMMs must match speed of first pair of DIMMs, but can vary in size, type, technology, and physical design.
Optional memory choices for slots 2 and 4 (Base)	2	☐ 1 GB ☐ 2 GB	Each DIMM in this pair must be the same size, speed, type, technology, and physical design.
Serial Attached SCSI (SAS) hard disk drive	1 or 2	73.4 GB SAS 10 K RPM	Optional; Support for two internal small-form-factor SAS drives; Optional 146 GB SFF SAS drive available
Networking expansion card options: SFF Gb Ethernet CFFv Gb Ethernet CFFh InfiniBand LFF/PCIX SFF/PCIE high-speed	1	☐ Ethernet ☐ Fibre Channel ☐ InfiniBand	Optional; 1 GB Ethernet Dual Port Expansion Card, CFF/PCIX Combo 4 GB Fibre Channel/1GB E'Net Expansion Card, CFF/PCIE, (QLogic) Myricom Myrinet Cluster Expansion Card, LFF/PCIX (InfiniBand) 4X InfiniBand Dual Port Expansion Card, SFF/PCIE, (Cisco)
SCSI storage expansion option	1	Supports two additional hot-swapped SCSI hard disk drives	Optional; QLogic iSCSI Expansion Card for IBM eServer BladeCenter
Fibre Channel storage expansion card options: CFFv controller SFF controller CFFh controller	1	Supports two adapters	Optional; QLogic 4Gb SFF Fibre Channel Expansion Card for IBM eServer BladeCenter QLogic 4Gb Fibre Channel Expansion Card (CFFv) for IBM BladeCenter 4 GB Fibre Channel Dual Port Expansion Card, SFF/PCIX (Emulex)

Table 7. BladeCenter JS21 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
8844 blade server	1	Two single-core, 64-bit, IBM PowerPC® 970MP microprocessors (2.7 GHz in BladeCenter H unit, 2.6 GHz in other BladeCenter units) or two dual-core, 64-bit, IBM PowerPC 970MP microprocessors (2.5 GHz in BladeCenter H unit, 2.3 GHz in other BladeCenter units)	Base with two 1 GB dual inline memory modules (DIMMs) standard with 2-core (two single-core processors); two 2 GB DIMMs with 4-core (two dual-core processors).
Memory slots 1 and 3. Select a memory size. (Optional)	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional; Second pair of DIMMs must match speed of first pair of DIMMs, but can vary in size, type, technology, and physical design.
Optional memory choices for slots 2 and 4 (Base)	2	☐ 1 GB ☐ 2 GB	Each DIMM in this pair must be the same size, speed, type, technology, and physical design.
Serial Attached SCSI (SAS) hard disk drive	1 or 2	73.4 GB SAS 10 K RPM	Optional; Support for two internal small-form-factor SAS drives; Optional 146 GB SFF SAS drive available
Networking expansion card options: SFF Gb Ethernet CFFv Gb Ethernet CFFh InfiniBand LFF/PCIX SFF/PCIE high-speed	1	☐ Ethernet ☐ Fibre Channel ☐ InfiniBand	Optional; 1 GB Ethernet Dual Port Expansion Card, CFF/PCIX Combo 4 GB Fibre Channel/1GB E'Net Expansion Card, CFF/PCIE, (QLogic) Myricom Myrinet Cluster Expansion Card, LFF/PCIX (InfiniBand) 4X InfiniBand Dual Port Expansion Card, SFF/PCIE, (Cisco)
SCSI storage expansion option	1	Supports two additional hot-swapped SCSI hard disk drives	Optional; QLogic iSCSI Expansion Card for IBM eServer BladeCenter
Fibre Channel storage expansion card options: CFFv controller SFF controller CFFh controller	1	Supports two adapters	Optional; QLogic 4Gb SFF Fibre Channel Expansion Card for IBM eServer BladeCenter QLogic 4Gb Fibre Channel Expansion Card (CFFv) for IBM BladeCenter 4 GB Fibre Channel Dual Port Expansion Card, SFF/PCIX (Emulex)

Table 8. BladeCenter JS22 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
8844 blade server	1	Two single-core, 64-bit, IBM PowerPC® 970MP microprocessors (2.7 GHz in BladeCenter H unit, 2.6 GHz in other BladeCenter units) or two dual-core, 64-bit, IBM PowerPC 970MP microprocessors (2.5 GHz in BladeCenter H unit, 2.3 GHz in other BladeCenter units)	Base with two 1 GB dual inline memory modules (DIMMs) standard with 2-core (two single-core processors); two 2 GB DIMMs with 4-core (two dual-core processors).
Memory slots 1 and 3. Select a memory size. (Optional)	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional; Second pair of DIMMs must match speed of first pair of DIMMs, but can vary in size, type, technology, and physical design.
Optional memory choices for slots 2 and 4 (Base)	2	☐ 1 GB ☐ 2 GB	Each DIMM in this pair must be the same size, speed, type, technology, and physical design.
Serial Attached SCSI (SAS) hard disk drive	1 or 2	73.4 GB SAS 10 K RPM	Optional; Support for two internal small-form-factor SAS drives; Optional 146 GB SFF SAS drive available
Networking expansion card options: SFF Gb Ethernet CFFv Gb Ethernet CFFh InfiniBand LFF/PCIX SFF/PCIE high-speed	1	☐ Ethernet ☐ Fibre Channel ☐ InfiniBand	Optional; 1 GB Ethernet Dual Port Expansion Card, CFF/PCIX Combo 4 GB Fibre Channel/1GB E'Net Expansion Card, CFF/PCIE, (QLogic) Myricom Myrinet Cluster Expansion Card, LFF/PCIX (InfiniBand) 4X InfiniBand Dual Port Expansion Card, SFF/PCIE, (Cisco)
SCSI storage expansion option	1	Supports two additional hot-swapped SCSI hard disk drives	Optional; QLogic iSCSI Expansion Card for IBM eServer BladeCenter
Fibre Channel storage expansion card options: CFFv controller SFF controller CFFh controller	1	Supports two adapters	Optional; QLogic 4Gb SFF Fibre Channel Expansion Card for IBM eServer BladeCenter QLogic 4Gb Fibre Channel Expansion Card (CFFv) for IBM BladeCenter 4 GB Fibre Channel Dual Port Expansion Card, SFF/PCIX (Emulex)

Table 9. BladeCenter LS20 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with AMD Opteron processor	Base
Second processor	1	AMD Opteron processor	Optional
Memory slots 1 and 2	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Base
Optional memory choices slots 3 and 4	2	☐ 512 MB ☐ 1 GB ☐ 2 GB ☐ 4 GB	Optional
SCSI internal hard disk drive	1 or 2	☐ 36 GB ☐ 73 GB	Optional
I/O Expansion option	1	☐ Ethernet ☐ Fibre Channel ☐ SAS	Optional

Table 10. BladeCenter LS21 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with AMD Opteron processor	Base
Second processor	1	AMD Opteron processor	Optional
Memory slots 1 and 2	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Base
Optional memory choices slots 3 and 4	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
Memory slots 5 and 6	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
Optional memory choices slots 7 and 8	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
cKVM feature		☐ cKVM card	Optional
Internal hard disk drive	1	☐ 36 GB SAS ☐ 73 GB SAS ☐ 146 GB SAS ☐ 15.8 GB Solid State ☐ 31.4 GB Solid State	Optional
Storage and I/O Expansion blade	1	☐ PCI I/O Expansion Unit 3e ☐ Storage and I/O Expansion Blade	Optional
I/O Expansion option	1	☐ Ethernet ☐ Fibre Channel ☐ SAS	Optional

Table 11. BladeCenter LS41 blade server worksheet
Blade server model: ________________ Workstation blade name: ________________ Note: Blade name has a maximum of 20 characters. Blade server purpose: __________________________________ __________________________________ __________________________________ Operating system: ____________________ OS installation option: ☐ Preloaded ☐ Deployed through network management ☐ Manual install with product CD. Blade server IP information: ☐ Automatic through DHCP server ☐ Static: Host name _______________________ Subnet mask ______.______.___.______ IP address ______.______.___.______ Gateway address ______.______.___.______			Connects to I/O module I/O bay 1 _____________ I/O bay 2 ______________ I/O bay 3 ______________ I/O bay 4 ______________ Boot sequence: ___ Internal hard disk drive ___ Integrated storage drive ___ CD-ROM ___ Network Applications: 1. ___________________________ 2. ___________________________ 3. ___________________________
BladeCenter S chassis blade bay location 1 2 3 4 5 6
Component	Quantity	Details	Base or optional feature
Blade server	1	Blade server with AMD Opteron processor	Base
Second processor	1	AMD Opteron processor	Optional
Memory slots 1 and 2	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Base
Optional memory choices slots 3 and 4	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
Memory slots 5 and 6	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
Optional memory choices slots 7 and 8	2	☐ 512 MB ☐ 2 GB ☐ 1 GB ☐ 4 GB	Optional
cKVM feature		☐ cKVM card	Optional
Internal hard disk drive	1	☐ 36 GB SAS ☐ 73 GB SAS ☐ 146 GB SAS ☐ 15.8 GB Solid State ☐ 31.4 GB Solid State	Optional
Storage and I/O Expansion blade	1	☐ Multiprocessor Expansion Unit ☐ PCI I/O Expansion Unit 3e ☐ Storage and I/O Expansion Blade	Optional
I/O Expansion option	1	☐ Ethernet ☐ Fibre Channel ☐ SAS	Optional