Use this procedure if it appears that none of the devices in the BladeCenter S chassis has
power.
Problem
None of the devices in the BladeCenter S chassis seems
to be receiving power.
Investigation
Perform these steps to resolve the
problem:
- Verify that all power cords are plugged into 110-V ac or 220-V ac power
sources and that the power sources are working.
Note: All
power cords for a BladeCenter S chassis must
be plugged into the same type of ac power source. For example, all power cords
must be plugged into 110-V ac power sources or all power cords must be plugged
into 220-V ac power sources.
- Verify that the ac power and dc power LEDs on the power modules are lit.
- If you just installed an option, remove it. If the BladeCenter S chassis now
powers on, you might have installed more options than the power modules support.
You might need to install additional power modules in power module
bays 3 and 4.
- If the problem persists, go to Isolating component failures.