Blade servers cannot communicate with the media tray

Use this procedure if no blade servers in the BladeCenter S chassis can communicate with the media tray.


One or more blade servers is unable to communicate with the media tray in the BladeCenter S chassis.


Perform these steps to resolve the problem:
  1. Log in to the advanced management module and view the event log for I2C errors for devices on bus 7.
  2. If there are no error messages in the event log, look at the System LED panel on the front of the media tray and resolve any issues that you find. See BladeCenter S chassis system LED panel for more information.
  3. If the media tray is still not working properly, see I2C errors.