If a fan module is stopped, check to see if the fault LED is lit
on any of the fan modules.
Problem
One of the fan modules in the BladeCenter S chassis is
stopped.
Investigation
Perform these steps to resolve the
problem:
- Check the fan modules to see if the fault LED is lit. If the fault LED
is lit, replace the fan module.
- From the advanced management module Web
interface, go to the System Status page and check the status of the fan module.
If the System Status page shows that the fan module has failed, replace
the fan module.
- Reseat the fan module.
- Swap the fan module with another working fan module.
- If the problem fan module does not work, but the other fan module does
work, replace the fan module.
- If the problem fan module now works, but the other fan module no longer
works, call IBM support.