Advanced management module configuration worksheet - BladeCenter S Types 7779 and 8886

For more information, see Planning for advanced management module configuration.

See the Advanced Management Module Installation Guide for more information about configuring the advanced management module.

General settings

Setting	Value
Advanced management module name
Contact name
Date and Time	Date: ________________________ Time: ________________________ __ Daylight Savings Time __ Use NTP server: Server Hostname/IP address: ______________________ Update frequency (in minutes): ___________ NTP v3 authentication: ___ Enabled ___ Disabled Key index: ____ Key: __________________________________
Trespass warning	___ Enabled ___ Disabled Text:

Login profiles

Login ID	Password	Role	Access scope

SNMP v3 user profile

Authentication protocol	Privacy protocol	Access type
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________
___ None ___ MDA ___ SHA	___ None ___ DES ___ AES Privacy password: __________	___ Get ___ Set ___ Trap Trap hostname/IP: _________________

Account Security

____ Legacy security

____ High security

____ Custom security

Custom security setting
User login password required	___ Yes ___ No
Password expiration period
Minimum password reuse cycle
Minimum password change interval
Maximum number of login failures
Lockout period after maximum login failures
Complex password rules
Minimum different characters in passwords
Require change to Factory default USERID account password at next login	___ Yes ___ No
User must change password on first login	___ Yes ___ No
Inactivity alert period
Inactivity alert and disable period

Alerts

Remote alert recipients
Receives critical alerts only
	Status
	Notification method: ___ SNMP - hostname: _______________________________ ___ E-mail - address: _______________________________ ___ IBM Director - hostname: __________________________
Global remote alert settings
Remote alerts retry limit
Delay between retries
Include event log with e-mail alerts			___ Yes ___ No
Alerts to be monitored
	Critical alerts	Warning alerts	Informational alerts
Chassis/System Management
Cooling devices
Power modules
Blade servers
I/O modules
Event log
Power On/Off
Inventory change
Network change
User activity

Serial port

Baud rate
Parity
Stop bits

Port assignments

Table 1. User-configurable advanced management module ports
Port name	Default port number	Description
HTTP	80	Port used for Web server HTTP connection using UDP
HTTPS	443	Port used for SSL connection using TCP
Telnet	23	Port used for the Telnet command-line interface connection
SSH	22	Port used for the Secure Shell (SSH) command-line interface connection
SNMP Agent	161	Port used for SNMP get/set commands using UDP
SNMP Traps	162	Port used for SNMP traps using UDP
FTP	21	Port used for the listen port of the management-module FTP server.
FTP Data	20	Port used for the data port of the management-module FTP server.
TFTP	69	Port used for the management-module TFTP server.
SLP	427	Port used for the UDP Service Location Protocol (SLP) connection
Remote Disk	1044	Port used for the advanced management module remote disk server.
Remote Disk-On-Card	1045	Port used for the management-module remote disk-on-card server.
Storage Description Server	1046	Port number for the management-module storage description server.
Remote KVM	3900	Port used for the management-module remote KVM server.
TCP command mode	6090	Port used for IBM® Director commands using TCP/IP. Note: IBM Director might not be able to locate the advanced management module if this port number is changed.
SMASH command-line processor	50023	Port used for the management-module SMASH command-line protocol over Telnet.
Secure SMASH command-line processor	50022	Port used for the management-module secure SMASH command-line protocol over SSH.

External network interface

DHCP	__ DHCP with rollover to static
	__ DHCP only
	__ Static IP only
Host name
Static IP configuration (configure only if DHCP is disabled)
IP address	_____._____._____._____
Subnet mask	_____._____._____._____
Gateway IP address	_____._____._____._____

I/O module IP Configuration

I/O module bay 1
IP address (default is 192.168.70.127)	_____._____._____._____
Subnet mask	_____._____._____._____
Gateway IP address	_____._____._____._____
I/O module bay 2
IP address (default is 192.168.70.128)	_____._____._____._____
Subnet mask	_____._____._____._____
Gateway IP address	_____._____._____._____
I/O module bay 3
IP address (default is 192.168.70.129)	_____._____._____._____
Subnet mask	_____._____._____._____
Gateway IP address	_____._____._____._____
I/O module bay 4
IP address (default is 192.168.70.130)	_____._____._____._____
Subnet mask	_____._____._____._____
Gateway IP address	_____._____._____._____

Network protocols

SNMP
SNMPv1 agent	__ Enable ___ Disable
SNMPv3 agent	__ Enable ___ Disable Note: If you enable the SNMPv3 agent, you must configure SNMPv3 settings for active login profiles in order for the interaction between the SNMPv3 manager and SNMPv3 agent to work properly.
SNMP traps	__ Enable ___ Disable
SNMPv1 community	Name: __________________
	Access Type: ___Get ___ Set ___Trap
	Host name or IP address (up to 3):
SNMPv1 community	Name: __________________
	Access Type: ___Get ___ Set ___Trap
	Host name or IP address (up to 3):
SNMPv1 community	Name: __________________
	Access Type: ___Get ___ Set ___Trap
	Host name or IP address (up to 3):
SNMPv1 community	Name: __________________
	Access Type: ___Get ___ Set ___Trap
	Host name or IP address (up to 3):
SMTP
Host name (or IP address)
LDAP
LDAP server locations	Use DNS to find LDAP servers: Domain source: ________________________ Search domain: ________________________ Service name: ______________________
LDAP server locations	Use pre-configured LDAP servers: Host name or IP address (and port): ________________________ Host name or IP address (and port): ________________________ Host name or IP address (and port): ________________________
Parameters	Root DN: ______________
	UID search attribute: ______________________
	Binding method: ____________________ Client DN: _________________ Password: _________________
	Enhanced role-based security for Active Directory users: ___ Enabled ___ Disabled Group filter: __________________ Group search attribute: ____________________ Login permission attribute: _________________
DNS
DNS	__ Enable ___ Disable
DNS Server IP address 1	_____._____._____._____
DNS Server IP address 2	_____._____._____._____
DNS Server IP address 3	_____._____._____._____
TCP command mode
Command mode sessions	Number of sessions (1-5): _____
Session timeout	Timeout in seconds (0-4294967295): ___________ Note: Use 0 if you do not want the session to ever time out.
SLP
SLP address type	___ Multicast ___ Broadcast
Multicast IP address
FTP
FTP server	__ Enable ___ Disable
FTP idle timeout
TFTP
TFTP server	__ Enable ___ Disable
Remote Control
Remote disk	__ Enable ___ Disable
Remote disk on card	__ Enable ___ Disable
Remote video (KVM)	__ Enable ___ Disable
SMASH CLP
SMASH CLP	__ Enable ___ Disable
Secure SMASH CLP	__ Enable ___ Disable
Syslog Protocol
Filtering level	___ Information ___ Error ___Warning
Collector hostname/IP address	1. ______________________________ 2. ______________________________

Security

Data encryption	___ Enable ___ Disable Important: If you enable data encryption, the only way to disable it is to reset the advanced management module to the factory defaults.
Secure Sockets Layer (SSL)	___ Enable ___ Disable
Secure Shell server (SSH)	___ Enable ___ Disable SSH version: ____________