Use this worksheet to plan for integrated shared storage configuration by assigning hard disk drives to blade servers and blade servers to external ports on the SAS connectivity modules.
| I/O Bay 3 | I/O Bay 4 | |
|---|---|---|
| Nickname | ||
| TCP Ports: Administration (6641) |
☐ Use defaults Administration: _______ |
☐ Use defaults Administration: _______ |
| NTP Server IP address |
Zone the SAS storage by assigning hard disk drives to blade servers and blade servers to external ports on the SAS connectivity modules. If you are going to mirror drives between disk storage modules, consider assigning the same hard disk drive or hard disk drives in each disk storage module to a specific blade server, depending on your zoning configuration.
| Resource | Blade server name | |||||
|---|---|---|---|---|---|---|
| Bay 1 | Bay 2 | Bay 3 | Bay 4 | Bay 5 | Bay 6 | |
| Disk storage module 1 | ||||||
| HD 1 | ||||||
| HD 2 | ||||||
| HD 3 | ||||||
| HD 4 | ||||||
| HD 5 | ||||||
| HD 6 | ||||||
| Disk storage module 2 | ||||||
| HD 1 | ||||||
| HD 2 | ||||||
| HD 3 | ||||||
| HD 4 | ||||||
| HD 5 | ||||||
| HD 6 | ||||||
| SAS connectivity module - I/O Bay 3 | ||||||
| External port 1 | ||||||
| External port 2 | ||||||
| External port 3 | ||||||
| External port 4 | ||||||
|
SAS connectivity module - I/O Bay 4 |
||||||
| External port 1 | ||||||
| External port 2 | ||||||
| External port 3 | ||||||
| External port 4 | ||||||
Predefined configuration #: _____
User defined configuration #: _____
Configuration name: ____________