Installing the DVD drive

To install a DVD drive, slide the DVD drive into the media tray until the DVD drive release locks. Then, close the media tray cover.

Note: The procedure for installing the CD-RW/DVD-ROM drive or the DVD-RW drive is the same.
Illustration of BladeCenter unit showing the installation of a DVD drive
  1. Position the media tray so that the front of the media tray is facing you.
  2. Slide the DVD drive into the media tray until the DVD drive release locks.
  3. Insert the front of the cover into the front of the media tray.
  4. Rotate the rear of the cover down until it closes.
  5. Install the media tray from the BladeCenter S chassis. See Installing the media tray.
Parent topic: Removing and replacing CRUs