You can install the media tray while the BladeCenter S system is powered on. To install it, slide it into the BladeCenter S chassis and close the release handles.
Important: If you are installing the media tray
in a BladeCenter S chassis in
which SAS RAID controller modules are
installed, refer to the BladeCenter S SAS RAID Controller Module Installation
and User's Guide for additional steps that might
need to be performed.
- Open the release handles (rotate the top handle up and the bottom handle down).
- Slide the media tray into the BladeCenter S chassis until it stops.
- Close the release handles (rotate the top handle down and the bottom handle up).