E-mail notification

The advanced management module can be configured to send e-mail to users when an alert occurs. You can also select the severity and types of alerts that are generated.

The following figure shows an example of the e-mail generated if a user is configured to receive critical alerts for chassis cooling devices.

Figure 1. E-mail notification

Subject: Non-Critical Alert from test_board
Alert Text: Event log full

Type of Alert: Non-Critical
Severity: 2
Application ID: ServProc
Application Alert Type: 07
Event ID:0x0000006b
Log Source:SERVPROC
Date(m/d/y): 08/11/08
Time(h:m:s): 12:56:00

Contact: No Contact Configured
Location: No Location Configured

BladeCenter MM Name: test_board
BladeCenter Serial Number:
BladeCenter UUID: 07A3284990D2893F40224195720A145
BladeCenter Machine Type/Module:
Call Home Flag: N
AMM IP Address: 9.123.253.66

For more information about configuring e-mail alerts from the advanced management module Web interface, see the Advanced Management Module User’s Guide. For more information about configuring e-mail alerts from the advanced management module command-line interface (CLI), see the Advanced Management Command-Line Interface Reference Guide.