Enabling SSL for the secure web server

You can enable the Secure Sockets Layer (SSL) for the management-module secure web server.

Note: To enable SSL, a valid SSL certificate must be installed.

To enable the secure web server, complete the following steps:

  1. In the navigation pane, click MM Control → Security. The page that is displayed is similar to the one in the following illustration and shows that a valid SSL server certificate is installed. If the SSL server certificate status does not show that a valid SSL certificate is installed, see SSL server certificate management.
    Graphic illustrating the SSL Server Certificate Management page.
  2. Scroll to the SSL Server Configuration for Web Server section and select Enabled in the SSL Server field; then, click Save. The selected value takes effect the next time the management module is restarted.
Parent topic: Secure web server and secure LDAP