Select MM Control → General Settings to enter identifying information, such as time, date, and location.
The following illustration shows the General Settings page for an advanced management module.
Select General Settings to view or change the following settings:
- The name of the management module
- The name of the contact person who is responsible for the management module
- The physical location of the management module
- The real-time clock settings in the management module, including
network time protocol (NTP) settings for the advanced management module. NTP
settings enable automatic synchronization, and set the NTP server IP address,
the update frequency, and how often the management module connects.
- Enable or disable the trespassing warning and modify warning text. If the warning text is enabled, this message is displayed to users each time that they log in to the management module.
Some of the general settings are used during SNMP and SMTP configuration. See Configuring SNMP and Configuring SMTP for additional information.