alarm command errors

This topic lists error messages for the alarm command.

See Common errors for a list of error messages that apply to all commands.

Table 1. alarm command errors
Error message Definition
A duplicate option is found in the requested command. A duplicate argument is entered.
Alarm Description must be provided for setting an alarm. The user tries to set an alarm without providing an alarm description.
Alarm ID must be from 1 to 255. An invalid alarm ID is entered.
Category must be from 1 to 255. An invalid category argument is entered.
Generator ID must be from 1 to 255. An invalid generator ID is entered.
Generator ID must be provided. A generator information ID is provided without a generator ID.
Module ID must be from 1 to 255. An invalid module ID is entered.
No active alarm. No active alarm is found for the command target.
No matching alarm. No matching alarm is found for the command target.
Reading system health summary failed. An error occurs while the management module is getting the system health summary.
Severity level must be provided for setting an alarm. The user tries to set an alarm without specifying the severity level.
Software Generator ID must be from 1 to 255. The user tries to enter an invalid generator information.
The entered Alarm Key is not in proper format. The user tries to enter an invalid alarm key.
Unable to acknowledge the requested alarm. An error occurs while the management module is acknowledging an alarm.
Unable to clear the requested alarm. An error occurs while the management module is clearing an alarm.
Unable to set the requested alarm. An error occurs while the management module is setting an alarm.