This topic lists error messages for the power command.
See Common errors for a list of error messages that apply to all commands.
| Error message | Definition |
|---|---|
| Invalid POST results. | The POST results are not valid. |
| Not supported by this type of I/O module. Type env -h for help on changing targets. | The user attempts to apply the -fp option to an I/O module that does not support this option. |
| POST results could not be read. | An error occurs during POST. |
| POST results not complete: hex_code
where the hex_code value varies based on the problem that was encountered. |
The POST results are not available. See the documentation that comes with the device that failed to respond correctly to the power command for information about the hex_code value. |
| Powering on/off blade failed. | An error occurs while powering the blade server on or off. |
| Powering on/off I/O Module failed. | An error occurs while the management module is powering the I/O module on or off. |
| Powering on/off network clock failed. | An error occurs while the management module is powering the network clock on or off. |
| Powering on/off Telco Alarm Panel failed. | An error occurs while the management module is powering the Telco Alarm Panel on or off. |
| Resetting blade failed. | An error occurs while the management module is resetting the blade server. |
| Shutting down OS and powering off blade failed. | An error occurs while the management module is shutting down the operating system and powering off the blade server. |
| The I/O Module is powering off. | The user tries to power on, power off, or restart a RAID SAS module which is in the process of powering off. (BladeCenter S only) |