sol command errors

This topic lists error messages for the sol command.

See Common errors for a list of error messages that apply to all commands.

Table 1. sol command errors
Error message	Definition
An error occurred while disabling SOL globally.	An error occurs while the management module is disabling SOL globally.
An error occurred while disabling SOL on that blade.	An error occurs while the management module is disabling SOL on a blade server.
An error occurred while enabling SOL globally.	An error occurs while the management module is enabling SOL globally.
An error occurred while enabling SOL on that blade.	An error occurs while the management module is enabling SOL on a blade server.
An error occurred while reading the global SOL status.	An error occurs while the management module is reading the global SOL status.
An error occurred while reading the SOL accumulate timeout.	An error occurs while the management module is reading the SOL accumulate timeout.
An error occurred while reading the SOL retry count.	An error occurs while the management module is reading the SOL retry count.
An error occurred while reading the SOL retry interval.	An error occurs while the management module is reading the SOL retry interval.
An error occurred while reading the SOL send threshold.	An error occurs while the management module is reading the SOL send threshold.
An error occurred while reading the SOL session status on that blade.	An error occurs while the management module is reading the SOL session status on a blade server.
An error occurred while reading the SOL VLAN ID.	An error occurs while the management module is reading the SOL VLAN ID.
An error occurred while setting the SOL accumulate timeout.	An error occurs while the management module is setting the SOL accumulate timeout.
An error occurred while setting the SOL blade reset sequence.	An error occurs while the management module is processing the command.
An error occurred while setting the SOL escape sequence.	An error occurs while the management module is processing the command.
An error occurred while setting the SOL retry count.	An error occurs while the management module is setting the SOL retry count.
An error occurred while setting the SOL retry interval.	An error occurs while the management module is setting the SOL retry interval.
An error occurred while setting the SOL send threshold.	An error occurs while the management module is setting the SOL send threshold.
An error occurred while setting the SOL vlan id.	An error occurs while the management module is processing the command.
Checking if this blade supports SOL failed.	An error occurs while the management module is checking if the selected blade supports SOL.
Invalid arg for -status. Must be on or off.	A user tries to enter an invalid argument for the -status command option.
Invalid arg for -status. Must be enabled or off.	A user tries to enter an invalid argument for the -status command option.
Invalid parameter. The accumulate timeout must be between 1 and 251 inclusive.	A user tries to enter an accumulate timeout that is outside of the valid range.
Invalid parameter. The retry count must be between 0 and 7, inclusive.	A user tries to enter a retry count that is outside of the valid range.
Invalid parameter. The send threshold must be between 1 and 251 inclusive.	A user tries to enter a send threshold that is outside of the valid range.
Invalid parameter. The vlan id must be between 1 and 4095 inclusive.	A user tries to enter a VLAN ID that is out of range.
Retry interval range is too large. Setting to 2550.	A user tries to enter a retry interval that is greater than 2550 ms. If the user tries to enter a retry interval greater than 2550 ms, the retry interval will be set to 2550 ms.
Setting retry interval to 2500 failed.	An error occurs while the management module is setting the retry interval to 2550.
This blade does not support SOL.	A user tries to issue the SOL command to a blade server that does not support SOL.