write command errors

This topic lists error messages for the write command.

See Common errors for a list of error messages that apply to all commands.

Table 1. write command errors
Error message	Definition
Failed to save configuration settings to the chassis.	An error occurs while the management module is saving the management module configuration to the BladeCenter unit midplane.
Firmware update is in progress. Try again later.	A user tries to save the management module configuration to the BladeCenter unit midplane while the management module firmware is updating.
Getting security status failed.	An error occurs while the management module is reading the security status.
The -config option is required.	The user does not include a required -config option for the command.
The -i, -l, and -p options can only be used with the -config file.	The user tries to specify a TFTP server and a configuration file when saving the configuration to the BladeCenter unit midplane.
The -i option is required with the -config file.	A user tries to use the -i option with the -config chassis option.
The -p option is required when encryption is enabled.	The user tries to issue a command without the -p option while encryption is enabled.
Error creating file in memory.	The management module is unable to create the configuration file.
Error locking file.	The management module is unable to lock the configuration file.
Error opening file.	The management module is unable to open the configuration file.
Error transferring file.	The management module is unable to transfer the configuration file.
Error generating file.	The management module is unable to generate the configuration file.
Error allocating memory for file.	The management module is unable to allocate memory for the configuration file.
The passphrase is greater than 1600 characters.	The user input for the passphrase exceeds the maximum permitted length.
The passphrase must be quote-delimited.	The user input for the passphrase is not quote-delimited.