This topic lists errors for the zonecfg command.
See Common errors for a list of error messages that apply to all commands.
| Error message | Definition |
|---|---|
| Activating zone configuration xxx on I/O module yyy failed. | The management module is unable activate the specified zone configuration on the specified I/O module. |
| Getting current active zone number failed. | An error occurs while the management module is reading the current active zone number. |
| Getting specified configuration of switch slot failed. where slot identifies the targeted I/O module. |
An error occurs while the management module is reading the specified configuration of the targeted I/O module. |
| Getting zone configuration failed. | An error occurs while the management module is reading the zone configuration. |
| Invalid slot number for this command. | The I/O module is not in slot 3 or 4. |
| The index must be 32 or less. | The configuration index is bigger than 32. |
| Zone configuration not supported on this switch type. | The user tries to use this command on a non-SAS switch module. |
| The I/O Module is currently not powered on or in a fault state. | The user tries to show or activate a zone configuration for an RSS or NSS which is in the power-off state and a fault state. |
| Error retrieving data for I/O module bay_number. where bay_number identifies the targeted I/O module. |
An error occurs while the management module is reading the data for the specified I/O module. |