0x00000072
POST watchdog triggered

Explanation

The power on self test (POST) watchdog in the specified blade server has been triggered.

Severity

Error

Alert Category

Blades (Critical) - mmTrapBladeC

Log Source

Blade_##

Automatically notify service

No

Recoverable

No

Alarm Panel LED (BC T and BC HT)

Critical

User response

Perform these steps:
  1. From the advanced management module Web interface, look at the LEDs for the blade server (click Monitors and then click LEDs) and check for any errors. If an error has occurred, refer to the Hardware Maintenance Manual and Troubleshooting Guide or the Problem Determination and Service Guide for the specified blade server type to resolve the error. The Hardware Maintenance Manual and Troubleshooting Guide and Troubleshooting Guide or the Problem Determination and Service Guide are available on the Web.
  2. If you added options to the blade server, reseat those options. Otherwise, reseat the blade server.
  3. If the blade server is an HS20 or an HS40 blade server, listen for any beep codes that may occur when the blade server reboots. Refer to the Hardware Maintenance Manual and Troubleshooting Guide or the Problem Determination and Service Guide for more information about resolving beep codes.
  4. If the blade server is a JS20 blade server, refer to the Problem Determination and Service Guide for more information about this event.