Explanation
The system boot process for the specified blade server failed before the operating system was loaded.
Severity
Error
Alert Category
Blades (Critical)
-
mmTrapBladeC
Log Source
Blade_##
Automatically notify service
No
Recoverable
Yes
Chassis LED
Error
Alarm Panel LED (BC T and BC HT)
Major
User response
The actions to take are based on the type of blade server for which
this event was generated:
- From the BIOS menu on the blade server, verify that the boot parameters are configured
correctly. Restart the blade server and press F1 to display the BIOS menu.
- If you have added options to the blade server, reset those options. Otherwise, reset the blade server.
- Listen for any beep codes that may occur when the blade server reboots. Refer to the
Hardware Maintenance Manual and Troubleshooting Guide or the Problem Determination and Service Guide
for more information about resolving beep codes.