Explanation
The external interface of the management network for the blade server cannot be set.
Severity
Warning
Alert Category
Chassis/System Management (Warning)
-
mmTrapChassisN
Log Source
SERVPROC
Automatically notify service
No
Recoverable
No
Example Message
Failed to change service processor management network interface 1 configuration of blade 2.
Alarm Panel LED (BC T and BC HT)
Minor
User response
Perform these steps:
- Attempt to set the management network configuration for the blade server again.
- Reset the service processor on the blade server.
- Reseat the blade server.
- Update the firmware for the service processor on the blade server.
You can find firmware on the IBM BladeCenter software and device drivers Web page.