0x00015600


         Explanation
         When the primary advanced management module completes a firmware update or a standby advanced management
module is installed, the firmware for the standby will be updated if it is different
than the firmware level of the primary. The firmware update of the standby advanced management module failed.
         
            Severity
         Warning
         
            Alert Category         Chassis/System Management (Warning)
 -
mmTrapChassisN
         
            Log Source
         SERVPROC
         
            Automatically notify service
         No
         
            Recoverable
         No
         
            Example Message
         Firmware update of Standby Management Module from MM 1 to MM 2 failed.
         
            Alarm Panel LED (BC T and BC HT)
         Minor
         User response
         Restart the primary advanced management module.
When the primary advanced management module is restarted, it will determine that the firmware levels are different and will attempt
to update the firmware again.
If the primary advanced management module fails over to the standby (making it the primary) and the firmware levels are different,
the new primary advanced management module will attempt to update the previous primary advanced management module to the active firmware level.

                  Note: The background update of the standby advanced management module can upgrade to newer or older firmware levels.