0x00022008


         Explanation
         Ethernet port 0 on the primary advanced management module has failed.
         
            Severity
         Error
         
            Alert Category         Chassis/System Management (Critical)
 -
mmTrapChassisC
         
            Log Source
         SERVPROC
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Chassis LED
         Error
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               Check the event log for a recovery message. If present, no action is required.
               Restart the advanced management module.
               Flash (update if applicable) the firmware for the advanced management module and restart the advanced management
module.
               Fail over to the standby advanced management module if available. Then reseat the advanced management module that had the error.
Fail back to see if error persists. If the standby advanced management module is not present, reseat
the advanced management module.