0x00022053


         Explanation
         The backup core on the standby advanced management module failed during built-in self test (BIST).
This event is typically caused by an issue with the firmware image itself.  Reloading the firmware image will normally correct the situation.
         
            Severity
         Warning
         
            Alert Category         Chassis/System Management (Warning)
 -
mmTrapChassisN
         
            Log Source
         SERVPROC
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Chassis LED
         Error
         
            Alarm Panel LED (BC T and BC HT)
         Minor
         User response
         Perform these steps at your earliest convenience:

               Restart the primary advanced management module.
               Restart the standby advanced management module.
               Initiate a failover to the standby advanced management module and either reload the advanced management module
firmware or update the firmware to the latest level.
               Reseat the advanced management module.
               Reload or update the advanced management module firmware again.
               Generate a manual call home using Service Advisor to replace the advanced management module.