0x00222000


         Explanation
         The advanced management module encountered a failure on system management bus.
A failover was initiated and the advanced management module is now the standby advanced management module.
         
            Severity
         Error
         
            Alert Category         Chassis/System Management (Critical)
 -
mmTrapChassisC
         
            Log Source
         SERVPROC
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Chassis LED
         Error
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               At your earliest convenience, initiate a failover to make the advanced management module
the primary advanced management module.  This will reset the advanced management module.
               Verify that the advanced management module can communicate with other components in the chassis.

                     If it cannot
communicate with other any devices, perform these steps:

                           Reset the advanced management module.
                           Replace the advanced management module.
                        

                     
                     If it can communicate with other devices, go to the built-in self test (BIST) results from the AMM Status page of the advanced management
module Web interface to determine which component may be causing a problem.