0x04000080


         Explanation
         A fault has occurred in the Multiprocessor Expansion Unit for the specified blade server.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               Flash (update if applicable) the firmware for the service processor (BMC), BIOS, and firmware for the advanced management module.
               Reseat the Multiprocessor Expansion Unit.
               Remove all components in the Multiprocessor Expansion Unit.  Then add the components back in, one at a time.  Restart
the blade server each time to see if the issue has been corrected.
               Replace the following components one at a time, in the order shown, restarting the blade server each time:

                     Multiprocessor Expansion Unit
                     Base system board assembly (trained service technician only)
                  

               
            

            Refer to the Problem Determination and Service Guide for the specified blade server type
for information about the Multiprocessor Expansion Unit.  The Problem Determination and Service Guide is available on the Web.