0x04000300


         Explanation
         The power jumper in the specified blade server is not present. The blade server must either have a power jumper
or be attached to an I/O Expansion Blade to power up.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               If the blade server does not have an I/O Expansion Blade installed, make sure
that the power jumper is correctly installed in power connector J164.
               Reattach the I/O expansion blade.
            

            Refer to the Problem Determination and Service Guide for the specified blade server type
for information about installing power jumpers.  The Problem Determination and Service Guide is available on the Web.