0x04204008


         Explanation
         The specified CPU on the specified blade server has been disabled.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Major
         User response
         Perform these steps:

               Restart the service processor for the specified blade server.  You can restart the service processor from the advanced management module Web interface.
               Reboot the blade server and press F1 to display the BIOS menu:

                     Verify that both processors are being seen by BIOS.
                     Load the default settings.
                     Go to the advanced setup menu, select the CPU settings, and attempt to re-enable the CPU slot.
                  

               
               Swap processors on the blade server to determine if the problem is related to the CPU slot or the processor.
               If this error is occurring for both processors, go to the IBM BladeCenter software and device drivers Web page for firmware updates.