0x06016000


         Explanation
         A fault has occurred in the I/O expansion blade.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               Flash (update if applicable) the firmware for the service processor (BMC), BIOS, and firmware for the advanced management
module.
               Reseat the I/O Expansion Unit.
               Remove all components in the I/O Expansion Unit.  Then, add the components back in, one at a time.  Restart
the blade server each time to see if the issue has been corrected.
               Replace the following components one at a time, in the order shown, restarting the blade server each time:

                     I/O Expansion Unit
                     Base system board assembly (trained service technician only)
                  

               
            

            Refer to the Problem Determination and Service Guide for the specified blade server type
for information about removing and installing components. The Problem Determination and Service Guide is available on the Web.