Explanation
The advanced management module cannot communicate with the specified power module.
Severity
Error
Alert Category
Power Modules (Critical)
-
mmTrapPsC
Log Source
Power_##
Automatically notify service
No
Recoverable
Yes
Chassis LED
Error
Alarm Panel LED (BC T and BC HT)
Critical
User response
Perform these steps:
- Check the event log for other power related events and resolve them (for example, a blade server has throttled or fan modules are running at full speed).
- Verify that the DC LED is lit on the power module.
If the DC LED is lit:
- Reseat the power module.
Note: Before reseating or replacing a power module, make sure that you have sufficient power modules in the chassis to power the remaining components in the chassis.
Otherwise, components might be powered off, which might disrupt BladeCenter system operations.
- Check the event log for any other communications events and resolve them.
- Replace the power module.
If the DC LED is not lit, make sure that there is power coming to the power module.