0x08238001


         Explanation
         The current in the specified power module exceeded the current fault threshold.
         
            Severity
         Error
         
            Alert Category         Power Modules (Critical)
 -
mmTrapPsC
         
            Log Source
         Power_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Chassis LED
         Error
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               Reseat the power module.
               Check the event log for other system devices that might be having a similar problem, which might indicate that the problem was caused by an external short. If
no external short is found, replace the power module.
               If the problem persists, verify that you have a stable power input source.

                     Note: (DC Current) Only trained service personnel, other than IBM service technicians,
are authorized to make the connections to and disconnections from the -48 volt DC power source.
IBM service technicians are not certified or authorized to install or remove the -48 volt power cable.
The customer is responsible for ensuring that only trained service personnel install or remove
the -48 volt power cable.