0x0D01E000


         Explanation
         A fault has occurred in the high-speed expansion card in the specified blade server.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         Yes
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               Verify that the high-speed expansion card is supported in the blade server (go to the
IBM ServerProven Web site).
               Update the firmware for the high-speed expansion card.
               Flash (update if applicable) the firmware for the service processor (BMC), BIOS, and firmware for the advanced
management module.
               Reseat the high-speed expansion card.
               Replace the high-speed expansion card.
            

            Refer to the Problem Determination and Service Guide for the specified blade server type
for information about removing and installing a high-speed expansion card.  The Problem Determination and Service Guide is available on the Web.