0x0E860402
BEM 12V standby over recommended voltage

Explanation

The voltage of the standby power module in the blade expansion module has exceeded the recommended voltage threshold.

Severity

Warning

Alert Category

Blades (Warning) - mmTrapBladeN

Log Source

Blade_##

Automatically notify service

No

Recoverable

Yes

Alarm Panel LED (BC T and BC HT)

Minor

User response

  1. Check the event log for other over voltage events. If the over voltage problem is occurring on all blade servers, look for other events in the log related to power and resolve those events.
    Note: If the over voltage problem is occurring on all blade servers in the same power domain, the problem might be in one of the power modules that power that domain (log in to the advanced management module to see the power modules that are associated with each power domain). Replace the power modules, one at a time, to see if the problem is resolved.
  2. Reseat the blade server, the blade I/O expansion module (if installed), and the blade expansion module.