0x0EA01003
Unable to read VPD for I/O Module 03

Explanation

The advanced management module is not able to read the vital product data (VPD) for the specific I/O module.

Severity

Error

Alert Category

I/O Modules (Critical) - mmTrapIOC

Log Source

IOMod_##

Automatically notify service

No

Recoverable

Yes

Chassis LED

Error

Alarm Panel LED (BC T and BC HT)

Critical

User response

Perform these steps:
  1. If you have just installed the I/O module:
    1. Reset the I/O module through the advanced management module interface.
    2. Replace the I/O module.
  2. If you have recently updated the firmware for the advanced management module, revert back to the previous release of the firmware to see if this resolves the problem.
  3. If the I/O module has been working and you have not recently upgraded the management module firmware:
    1. Use the advanced management module interface to determine if the other I/O modules are present. If so, suspect the I/O module.
    2. Fail over to the second advanced management module (if an advanced management module is available in your chassis).
    3. Reboot the advanced management module.
    4. Upgrade the advanced management module firmware.
    5. Replace the advanced management module.