0x0EA0D909
Failed to activate firmware image on I/O Module 09

Explanation

The firmware image on the specified I/O module could not be activated. The I/O module will continue running the previously configured firmware.

Severity

Warning

Alert Category

I/O Modules (Warning) - mmTrapION

Log Source

IOMod_##

Automatically notify service

No

Recoverable

No

Alarm Panel LED (BC T and BC HT)

Minor

User response

Perform these steps:
  1. Make sure that the user has sufficient authority to activate the firmware image. See the Advanced Management Module User's Guide for more information about user roles.
  2. Attempt to reload the firmware image.
  3. Check the event log for other errors related to the I/O module (such as communication errors between the advanced management module and the I/O module).
  4. Check advanced management module system status panel to ensure the switch is functioning.