0x0EA0EA06


         Explanation
         The SAS Controller Module has detected a hard disk drive configuration error during drive array configuration.
         
            Severity
         Warning
         
            Alert Category         Storage Modules (Warning)
 -
mmTrapStorageN
         
            Log Source
         IOMod_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Minor
         User response
                  
            
               Log in to SAS RAID controller through either Storage Configuration Manager* or through the Command-line interface (CLI) to determine the cause of this event. *Storage Configuration Manager is not supported when configured with 12 disks storage module.
               See the IBM BladeCenter SAS RAID Controller Module Installation and User's Guide for more information about resolving the problem. The guide is available on the Web.