I/O module 05 is in Protected Mode without the MM's permission.
Explanation
The specified I/O module is in protected mode, but the advanced management module did not give permission for the I/O module to be in protected mode.
Severity
Informational
Alert Category
Network change (Informational)
-
mmTrapNwChangeS
Log Source
IOMod_##
Automatically notify service
No
Recoverable
No
User response
Perform these steps:
- If you are not using protected mode, turn off protected mode through the advanced management module interface.
- If you are using protected mode, access the I/O module through the I/O module interface and correct the protected mode configuration.