0x0EA0F909


         Explanation
         The advanced management module is unable to communicate with the specified SAS I/O module. The SAS I/O module may be functioning normally, but the advanced management module will not be able to generate any additional events for the SAS I/O module.
         
            Severity
         Warning
         
            Alert Category         Storage Modules (Warning)
 -
mmTrapStorageN
         
            Log Source
         IOMod_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Alarm Panel LED (BC T and BC HT)
         Minor
         User response
         Perform these steps:

               Wait a few minutes to see if a recovery event is generated (especially if the firmware for the SAS I/O module has just been updated).
               Access the Web interface for the SAS I/O module to verify that it is working.  If so, you might be able to wait for a scheduled outage to resolve the problem.
               Reseat the advanced management module.
               Reset the SAS I/O module through the advanced management module interface.

                     Note: When you reset the SAS I/O module, all connections to that I/O module will be broken, which may result in loss of data.
If the I/O module is the SAS RAID controller module, make sure that you stop all host I/O applications before you reset the module.