0x0EA1C402
I/O module 02 temperature fault

Explanation

The temperature for the specified I/O module has exceeded the fault threshold.

Severity

Error

Alert Category

I/O Modules (Critical) - mmTrapIOC

Log Source

IOMod_##

Automatically notify service

No

Recoverable

Yes

Chassis LED

Error, Temperature

Alarm Panel LED (BC T and BC HT)

Critical

User response

Perform these steps:
  1. Make sure the fan modules are working properly.
  2. Make sure the ambient temperature is within the operating requirements for the chassis.
  3. Make sure that a device or filler is installed in each bay in the front and rear of the chassis, and make sure that there is nothing covering the bays.
  4. Check to see if there is a firmware update for the advanced management module that is related to over temperature conditions. If so, update the firmware for the advanced management module.
  5. Update the firmware for the I/O module.
  6. Replace the I/O module.