0x0F00A001
AMM failed to set the Open Fabric Manager configuration for blade 01. Blade power permissions denied.

Explanation

The advanced management module cannot set the Open Fabric Manager configuration for the specified blade server.

Severity

Error

Alert Category

Blades (Critical) - mmTrapBladeC

Log Source

Blade_##

Automatically notify service

No

Recoverable

Yes

Chassis LED

Error

Alarm Panel LED (BC T and BC HT)

Critical

User response

Perform these steps:
  1. Power off the blade server, and then power it on again.
  2. Reseat the blade server.
  3. Update the firmware for the service processor on the blade server. You can find firmware on the IBM BladeCenter software and device drivers Web page.