0x0F00A002


         Explanation
         The advanced management module cannot set the Open Fabric Manager configuration for the specified blade server.
         
            Severity
         Error
         
            Alert Category         Blades (Critical)
 -
mmTrapBladeC
         
            Log Source
         Blade_##
         
            Automatically notify service
         No
         
            Recoverable
         Yes
         
            Chassis LED
         Error
         
            Alarm Panel LED (BC T and BC HT)
         Critical
         User response
         Perform these steps:

               Power off the blade server, and then power it on again.
               Reseat the blade server.
               Update the firmware for the service processor on the blade server. You can find firmware on the IBM BladeCenter software and device drivers
Web page.