0x0F00B005
Unable to apply Open Fabric Manager configuration to one or more devices at blade 05

Explanation

The Open Fabric Manager configuration cannot be applied to the specific blade server because the firmware does not support Open Fabric Manager.

Severity

Warning

Alert Category

Blades (Warning) - mmTrapBladeN

Log Source

Blade_##

Automatically notify service

No

Recoverable

Yes

Alarm Panel LED (BC T and BC HT)

Minor

User response

Perform this steps:
  1. From the advanced management module Web interface, go to the Open Fabric Manager page to determine which action is failing.
  2. See the IBM BladeCenter Open Fabric Manager Installation and User's Guide to verify that the specified blade server type and the expansion card options within the blade server support Open Fabric Manager. The guide is available on the Web.
  3. Upgrade the firmware for the blade server and all expansion card options. See the IBM BladeCenter Open Fabric Manager Installation and User's Guide for more information. The guide is available on the Web.