0x4001711E


         Explanation
         The standby advanced management module failed to synchronize with the primary advanced management module.
Therefore, the network interface for the standby advanced management module is disabled.   This log entry can be seen only
after a failover has occurred and the standby advanced management module becomes the primary.
         
            Severity
         Warning
         
            Alert Category         N/A
 -
mmTrapRemoteLoginS
         
            Log Source
         SERVPROC
         
            Automatically notify service
         No
         
            Recoverable
         No
         
            Alarm Panel LED (BC T and BC HT)
         Minor
         User response
         Perform these steps:

               If the firmware configuration has not changed recently, reseat the standby advanced management module.  Otherwise, reseat
the primary advanced management module.
               Check the IBM Support Web page for any service bulletins that might be related to this problem.
               Restore system defaults to factory settings.  Then attempt to apply the configuration again.