0x43000104


         Explanation
                  
            The specified user requested that the partition in the specified scalable blade complex be reset. If
the partition is off, it will turn on.
If the partition is on, it will turn off than then turn on.

         
         
            Severity
         Informational
         
            Alert Category         Blades (Informational)
 -
mmTrapBladeS
         
            Log Source
         Audit
         
            Automatically notify service
         No
         
            Recoverable
         No
         
            Example Message
         Complex A01C (blades 4,5,6,7): Reset Partition 1 (blades 4,5) request by USERID at 10.10.10.50 (Web)
         User response
                  
            This event only reports a requested action from a user for auditing purposes.
If the requested action does not appear to have the desired effect, perform
the following:

            
               Check the event log for other events related to the specified blade servers and resolve those events.
               Reset the blade system management processor on all blade servers in the scalable blade complex. You can
reset the service processor through the advanced management module Web interface from the
Blade Power/Restart page.
               Reseat the scalable blade complex.
               Update the firmware for the service processor on the blade server.  You can
find the appropriate firmware on the IBM BladeCenter software and device drivers Web page.