0x4300010A


         Explanation
                  
            The specified user performed a Set Auto Partition Configuration operation.
This request should result in having all the blade/nodes in a complex be configured into
a single partition.

         
         
            Severity
         Informational
         
            Alert Category         Blades (Informational)
 -
mmTrapBladeS
         
            Log Source
         Audit
         
            Automatically notify service
         No
         
            Recoverable
         No
         
            Example Message
         Complex A01C (blades 4,5,6,7): Create Auto Partition by USERID at 10.10.10.50 (Web)
         User response
                  
            If the requested action does not appear to have the desired effect, perform
these steps:

            
               Ensure that all the blade servers in the scalable blade complex are powered off.
               Check the event log for other events related to the specified blade servers and resolve those events.
               Reset the blade system management processor on all blade servers in the scalable blade complex. You
can reset the service processor through the advanced management module Web interface from the
Blade Power/Restart page.
               Reseat the scalable blade complex.
               Update the firmware for the service processor on the blade server.  You can
find the appropriate firmware on the IBM BladeCenter software and device drivers Web page.